Click image to view full size image
China Micro waterproof camera automotive imaging for safe and easy driving. Before you using your camera, please read the introduction as following carefully.
Image device: 1/3 inch color CMOS 0V7950
TV system: PAL/NTSC
Effective pixels: 628x582 pixels / 510 x 492 pixels
Sensing area: 5.87mm x 4.19mm / 4.69mm x 3.54mm
Sync. System: Internal
Resolution: 420 TV lines
Minimum illumination: 3Lux / F1.2 (0 Lux when infrared LED on)
Lens: 2.8mm / 120 deg
Night Vision range: 5m
S/N ration: More than 48dB
Electronic shutter: 1/60 - 1/15, 000 seconds
Video output: RCA connector, 1.0vp-p, 75ohm
Current consumption: 130mA
Power supply: 12V DC
Operating temperature: -10 to 50 degrees centigrade, RH 95% max
Storage temperature: -30 to 60 degrees centigrade, RH 95% max
Size: 25mm x 42mm
Operation:
1. Connect the yellow video jack with monitor video in put jack
2. Connect the red (or black) power input jack with power supply
POLARITY: (black)- -------------- + (red)
PRECAUTION:
1. Recommend using a regulated DC12V power supply uit with camera for best picture and for safe operation of the unit.
2. Do not cut the power input jack and connect the conductor to power supply directly, because that will FATALLY INJURED the camera. If you have to connect the conductor, please use our cable in accessories.
3. Do not attampt to disassemble the camera. The are no user serviceable parts indide. Refer servicing to qualified service person.
Micro Waterproof Car Rear View Camera
